E  Q  U  I  P  M  E  N  T     L  I  S  T

 

 

HIGH SPEED LASER CUTTING

 

AMADA DELTA 3015 LASER – 3000W flying optic laser system, with FANUC 16L, 32-bit controls unit and edge detection.  Capable of 60” x 120” maximum sheet size.  High speed shuttle table.  Cuts up to 5/8” thick work piece, in production quantities.

 

AMADA MODEL 2415XL LASER – 2000W high speed pulsar laser cutting machine, with FANUC 16L, 32-bit control unit. Capable of 60” x 198" maximum sheet size +/- 0.004”/20”.  Capable of cutting up to ½” work piece thickness in production quantities.

 

 

TURRET PRESS

 

AMADA COMA/PLASMA 567 TURRET PRESS – Auto-Index 44-station, 55 ton, line ready, precision turret punch press with Amada 04P-C controls.  Capable of handling 60” x 144 “ work piece size, up to 3/8” punch thickness, 300 strokes per minute, punch accuracy of 0.006 with cutting speed 40-600” per minute, electrically conductive up to ½” thickness and cutting accuracy +/- .032”.

 

 

PRESSES – HYDRAULIC

 

1250 TON VERSON – 54” stroke, 20” shut height, 72” x 144” ram.  48” x 56” center cushion with 265 tons capacity and two end cushions of 48” x 32” with 157 tons capacity each.  Stroke of all cushions is 18".  Equipped with two end resistance cylinders with 400 total tons for use on blanking operations.

 

 

600-TON LAKE ERIE – 42” stroke, 18” shut height, 66” x 96” bolster and 60” x 96” ram.  47” x 35” center cushion with 100 tons capacity and two end cushions of 47” x 19” with 50 tons capacity each.  Stroke of all cushions is 18".

 

STRIPPIT – 40 ton, numerically controlled, 30” throat, single station.

 

 

PANASONIC ROBOTIC WELDING

SYSTEM

 

 

FLAME CUTTING

 

LINDE CM-350 - Gas and plasma updated to CNC controls.  96 x 240” sheet capacity.

 

SQUARING SHEARS

 

STEELWELD – ½ x 144” capacity in mild steel.

 

 

HYDRAULIC SHEAR

 

AMADA H4013 H SERIES – Hydraulic shear.  Shears up to ½” material thickness, by 168” long mild steel, with CNC controls.

 

 

 

PRESSES MECHANICAL

STRAIGHT SIDE

 

900 TON BLISS – Double crank, 14” stroke, 35” shut height, 62” x 82” bolster and 42” x 74” ram.  Equipped with 9” ram filler block.

 

600 TON VERSON – Eccentric drive, 18”  stroke, 34” shut height, 60” x 96”  ram and 60" x 96" bolster.  Two cushions with 45 tons capacity each and with 9" stroke.

 

440 TON MECFOND – Eccentric drive, 12” stroke, 26” shut height, 60” x 96” ram and 60” x 96” bolster.  Three cushions with 90-ton total capacity and with 10" stroke.

 

290 TON BLISS - Double crank, 20" stroke, 36" shut height, 41" x 60" bolster and 40" x 55" ram.  Air cushion with 10 1/2 stroke.  Equipped with 16" rem filler block.

 

PRESS BRAKE

AMADA PROMECAM 8025 HFB SERIES  80 Ton with 8" bed length and CNC control with eight programmable axes.

 

600 TON PACIFIC - Press brake - 168" long ram and bed, 146" between housing with 14" throat depth.  22" open height and 10" closed height.  Equipped with 24" ram filler block.

 

VERSON - 60 ton mechanical, two speed, #11 GA x 96" capacity.  Steel well 300 ton mechanical 1/2" x 11', 5/8" x 8', 34" x 6' capacity.

 

STEELWELD - 300 ton mechanical 1/2" x 11' 5/8" x 8', 3/4" x 6' capacity.

 

PRESSES MECHANICAL

STRAIGHT SIDE

 

 

200 TON WARCO – 6” stroke, 30” x 42” bolster and 34-ton x 4” stroke cushion.

 

200 TON TOLEDO – Double crank, 8" stroke, 20” shut height, 41” x 60” bolster and 30” x 55” ram.  31-ton air cushion with 4” stroke.

 

160 TON MINSTER – Double crank, 8” stroke, 20” shut height, 41” x 60” bolster and 30” x 55” ram.  31-ton air cushion with 4” stroke.

 

150 TON VERSON – 12” stroke and 42” x 48” bolster.

 

 

PRESSES MECHANICAL - O.B.I.

 

100 TON DANLY - 8" stroke, 16/34" shut height, 30” x 40” bolster, 18” x 20” ram and 1-ton cushion with 4" stroke. 

 

71 TON ROCKFORD - 6" stroke, 15" shut height, 21" x 34" bolster, 12" x 11" ram and 5-ton cushion with 3" stroke.

 

71 TON ROCKFORD - 5" stroke, 14" shut height, 21" x 34" bolster, 12" x 11" ram and 5-ton cushion with 3" stroke.

 

50 TON MARSHALLTOWN – 3”   stroke, 7 ½” shut   height, 19” X 27”   bolster and 9”  x 10” ram

 

50 TON MARSHALLTOWN  - 3" stroke, 7 1/2"  shut  height, 19"  x  27"  bolster  and

9" x 10" ram. 

 

 

 

CNC MACHINING CENTERS

 

DYNA MYTE DM 4800 - 32" x 20" x 20', 24 station

Turret, 12 HP spindle.

 

OKUMA CADET-MATE - 35" x 20" x 20", 20 station Turret, 10 HP spindle.

 

 

INSPECTION EQUIPMENT

 

PORTAGE LAYOUT MACHINE - Vertical capacity 36", crossarm reach 27".  36" linebar for 3rd arm axis measurement on slotted table. Decimal scales - .050" graduations and .005" verniers, standard for 3- axes. Combination vertical/horizontal scribing head with 5 scribing tools.  Precision rack, Encoder mounting brackets, and fine adjustment on all three axes.